The PC+ system monitors the critical cleaning process parameters making adjustments where necessary ensuring the 'validated' or 'clinically proven' process is maintained.
Critical process parameters such as time, temperature and ultrasonic power are monitores in accordance with current guidance and international standards and can be recorded permanently through a discretely placed 'data-port' which intelligently detects whether you wish to keep the information on a database device or simply connect a printer for 'hard copy' print out for 'traceability' and legislative issues*.
*Accurate, detailed records of process parameters are required to be retained. (HSC 2000/032)
Medisafe Ultrasonic Cleaning Technology offers effective decontamination of surgical instruments, where cleaning effeciency reduces the risk of cross-infection.
Our easy-to-use machines are at work thoughout the world, decontaminating the most complex and delicate instrumentation. Patient care demands rigorous cleaning but surgical instruments are expensive and need to be handled gently. It is hard to imagine a more critical test. The good news is that the same ultrasonic methods can also be used to tackle cleaning problems in engineering workshops and laboratories. This is because industrial and medical cleaning have a shared objective: thoroughness, consistency and reliability.
Reliance PC+ Features:
5-tank sizes (2.6gal to 13.2gal) see below
High Grade corrosion resistant stainless steel with brushed finish (316)
Incluedes stainless steel basket
Wash time and temperature display
Temperature and time user adjustable
APG3000 two transducer and APG XP sonic generator 4 to 10 horn transducers.
Ultrasonic over-current protection
Flat panel heater to maintain selected temperature between times of inactivity.
Drain: Manual Lever operated ball valve.
Lid interlock system to prevent Ultra-sonics running with the lid open.
Stainless steel lid.
Fused L & N, Fused Ultrasonic Generator and control PCB
Low fluid level protection to prevent heater and Ultra-sonics from being activated with low or no water
Control Fascia is wipe clean polycarbonate.
2 line LCD display
Printer output (RS232) 9 pin D
(8 bit no parity 2400 baud)
Machine ID, Cycle number, Date & Time, Wash time, Wash Temp, UltraSonic status, APG3000 & APG XP current monitoring.
Allow 4-6 weeks delivery
Specifications
Quality
Manufactured under Medisafe’s IS09001 Quality
Use
For external cleaning of Medical or Dental Surgical Instrumentation.
Environmental
• For indoor use at altitudes up to 2000m.
• Operating temperature -5°C to 40°C.
• Humidity -80% RH max for temperatures up to 31°C, decreasing linearly to 50% RH at 40°C.
• Designed for Pollution Degree 2, i.e. not totally sealed.
Electricity Supply
110 — 120 VAC 50 or 60Hz
{OR Special order ...220 — 240 VAC 50 or 60Hz }
0.5 Watts (standby)
600 Watts depending on model (in use)
1200 Watts depending on model (max)
Water Supply
Hardness
Not more than 115 ppm Hot and Cold (HTM2030)
Manual fill
Drain
Main Drain: 18mm to drain (Hose supplied)
Max. Flow to Drain: 20 L/5.3 Gal min (Gravity)
Max. Temp. of Effluent: 60° C
Quality
Manufactured in the UK under Medisafe’s IS09001 Quality
