Medisafe Sonic Irrigator “PCF”- our largest, most aggressive floor model cannulated instrument-cleaning system, for cleaning cannulated instruments both inside and out, in a fully validated, clinically tested process.   

Our system combines; Automatic fill, auto pre-washing, auto enzyme injection, auto ‘pulsed’ sonic-flushing wash, auto 'pulsed’ sonic-rinsing, auto drain.  Cleaning up to 20 instruments at temperatures up to 140ºF both inside and out, in approximately 35 minutes per cycle.   

The PCF system has unequalled convenience!  Slide & Lock Basket, Convenient spray arm (optional), Oversized basin,  ‘Sonic only’ mode, Interlocking cabinet design allows you to combine systems at anytime for a side-by-side, dual tank system that can grow with your hospitals cleaning demands.
 
Special plumbing/drainage/electrical required and is responsibility of purchaser (call for installation specifications) 208v/3phase electrical required.  
14.7 gal tank size
35.5” length x 26.0” width x 41.0” high (add 19” with lid open).
For optimal cleaning performance use recommend 3E-Zyme Triple Enzyme Cleaning Solution  (#MEDIS-12041)

Specifications
Sonic Irrigator –PCF   #MED11121STD & #MED11121S

Quality

Manufactured in the UK under Medisafe’s IS09001 Quality

Use

For internal and external cleaning of cannulated / lumened surgical instrumentation

Environmental

For indoor use at altitudes up to 2000m / 6000ft
Operating temperature -5°C / 23°F   to   40°C / 104°F
Humidity -80% RH max for temperatures up to 31°C / 88°F,
decreasing linearly to 50% RH at 40°C / 104°F
Designed for Pollution Degree 2, i.e. not totally sealed.

General Description                      

Medical Device Class I

Operating Process

Ultrasonic activity plus high volume flushing

Applied Standards

BS2745: part 1: 1993
BS2745: part 3: 1993
EN60101-1:2001 (2nd Edition)
EN61010-2-045 (2001)
EN61326: 1997
A1: 1998
EN980                        

Wash Cycle Parameters

Min. Temp. During Cycle: determined by temperature of water supply
Max. Temp. During Cycle: 60° C / 140° F
Vol. of Dispensed Chemicals
Wash chemical: Detergent 414ml / 14.0oz (approx)
Final rinse chemical: 414ml / 14.0oz (approx)

Electricity Supply

208V  / 3phase / 60Hz
24 AMPS per phase max
15K watts
Lead Length: 5 feet

Printer:
Supply Voltage: single phase 110v / 0.1 amps (nominal) AC

Required Utilities

Water Supply

Cold water supply terminating into a Male ¾” NPT National Pipe Thread hose fitting

Hot water supply terminating into a Male ¾” NPT National Pipe Thread  hose fitting.  

Acceptable Pressure Range:
2.0 – 5.0 BAR (29 –72 PSI) hot & cold

Acceptable Temp. Range:
Hot:  104°F   - 140°F
Cold   41°F –  95°F   
Hardness CaCo3:    less than 110 ppm (HTM2030)

Drain

Type:    Single 4” diameter floor drain fitted with suitable traps on building side within 20” of equipment

>OR<  

Wall drain not more than 14” from floor is acceptable (no more than 48” from equipment)  Wall drain must accept 2.5” collar in diameter and be greater than 8 gallons per min.
 
Max. Flow to Drain:  8 gallons per min
Max. Temp. of Effluent: 60° C / 140° F.

Ventilation

Max. Heat Output of Load: 60° C / 140° F

Weight & Dimensions

Operational weight
267.5kgs / 587.7lbs
Wash Chamber Volume: 14.75 gal

Outer Cabinet Dimensions:
33.9”  (w)
22.8” (front to back) add approx 6” for plumbing outlet
43.7” (h) add approx 15” when lid fully opened